Most Forgotten Things To Clean Around the House

While most homeowners know the value of keeping their houses clean, no one is ever perfect at following through. As a result, we often overlook some areas or objects during this process. That’s why we made a list of some of the most forgotten things to clean around the house. Whether you’re a compulsive cleaner or only do it every once in a while, you’ll want to ensure you don’t skip over these items.

Ceiling Fans and Light Fixtures

If you’re a seasoned house cleaner, checking ceiling fixtures might have become a regular part of your routine by now, but many people tend to forget to look up when they’re cleaning. Ceiling fixtures—fans, in particular—get filthy very easily. Dust can reach quite high up into the air, and these fixtures are the only surface it can land on up there.

Fortunately, once you’re aware of it, these lights and fans are pretty easy to clean. The most challenging part will be reaching them if they’re too far from the ground. A stool or a duster with an extension rod will help you accomplish the task.

Air Vent and Filter Grates

For the same reason that a ceiling fan can accumulate tons of dust, air vent and filter grates can get dirty as well. Vents are usually more noticeable unless furniture obscures them, so we tend to clean them more often. However, the grates over the air filter are much harder to notice, so we often neglect them.

If it’s been a while, you might need to bring your grates outside and take a hose to them. However, once you get into the habit of cleaning them, a simple dusting will do the trick.

Propane Tanks and Appliances

While many people forget to clean the top of the refrigerator or behind the washer and dryer, none of these are more important than cleaning gas appliances and the tanks that supply them. You need to do a lot to care for these items properly, but keeping them clean is vital to ensuring their longevity.

As long as you give them a gentle scrub every few months, you shouldn’t have anything to worry about. Of course, it’s also a good idea to be more careful about creating the mess in the first place.

The Inside of Trash Cans

We’ve saved the best for last in this list of the most forgotten things to clean around the house: trash cans. Most people just assume that it’s okay to leave the inside of a trash can a mess, especially if it’s the one that you take outside every week for the trash collectors to dump. Think again. The object that collects all your waste should be the thing you clean most often. All kinds of germs can form in them, which could very easily get you and your family sick.

Make sure to clean them out regularly, either with a hose or, if it’s gotten really bad, some soap and a sponge. In extreme cases, it might be better just to throw it out and buy a new one.

Deciding a Roof Hatch That Fits Your Requirements

Choosing what type of roof hatch you will purchase for your establishment might be a difficult decision. Roof hatches are an essential part of your establishment because this product will allow your maintenance crew easy access whenever your roof needs repairs or checkups. Thus, you must thoroughly deliberate the quality and type of roof hatch you want to purchase. 

The roof access hatch usually contains horizontal doors covering roof openings and providing easy access using an interior ladder, service stairs, or ship stairs. The size and type of a structure usually determine the method of egress required. This article will lay out all the essential information about roof hatches to help you make the right choice. 

Figuring Out Your Roof Hatch's Purpose 

Determining who will use a hatch to gain access to the roof or serve as an entry for large types of equipment can help choose the hatch size required. You can often specify a small, single-cover model in conjunction with a fixed ladder, ship, or service stair if a hatch is for personnel access only. 

The frequency and reason to access the roof area can also impact the hatch size. One good example is how a larger hatch with a ship or service stair will enable workers to carry extensive tools to the roof for service purposes. It is essential to contact the roof hatch manufacturer to verify the hatch's hardware locations and clear opening.

Retrofit Vs. New Applications

Commonly, establishment owners purchase roof hatches for installment on a new roof, while some applications also need replacing an old or worn-out hatch. If you want a low-profile replacement hatch, This is perfect for retrofit applications. These hatches can cap over an old hatch curb without the need to replace your roofing material. The low-profile curb can be mounted directly to the existing curb if you remove the old hatch cover.

Facility Type

The facility where professionals install the hatch can also initiate choosing the type of roof hatch they desire. High-security applications, storage facilities, highly corrosive settings, or projects requiring special aesthetic considerations will require roof hatches that address the needs of these specific environments.

High-security environments such as prisons, pharmacies, banks, and embassies require highly secured entry and exit points, including roof openings against unauthorized access. Because of this, hatches can be manufactured from heavier gauge materials and modified with several modifications for enhanced security. You can include options such as gun ports, bullet-resistant view windows, and deadlocks.

Suppose you have highly corrosive environments like chemical plants or in areas with extreme weather conditions. For the highest level of corrosion resistance, your roof hatches should have aluminum or stainless steel material. Copper roof hatches can match the aesthetics of heritage projects and for buildings located in historic districts.

Cost

The cost of roof hatches will also vary depending on their material. You can specify hatches made of galvanized steel from a cost perspective. They provide a primary degree of corrosion resistance and are usually with a primer paint finish. If you want a more expensive option than galvanized steel, then aluminum hatches are your next option. This material is commonly supplied with a mill finish and requires only a little or no maintenance. Stainless steel and copper products are the most expensive material. Hatches fabricated to meet particular size requirements generally carry a price premium.

High-Quality Roof Hatches

Contractors should also consider common design elements to select a hatch that will provide a safe means of rooftop access. These factors include energy efficiency, ease of operation, and weather-tightness. A high-quality roof hatch will help sustain efficiency in an establishment, so choose a roof hatch with welded corners with full insulation in both the curb and cover. Many hatch manufacturers also offer insulation options if you want a more enhanced thermal performance. 

Custom Sizes

If all the sizes do not fit your preference, some manufacturers can customize their products without compromising the quality or performance. Roof hatches can also be supplied with curb liners or fully enclosed curbs if you want to install them on existing ones. You can also customize curbs so that they can be installed directly on standing-seam metal roof panels. It will allow the hatch to sit straight on a metal roof without a job-built curb or built with louvers into the curb to provide continuous ventilation into your establishment. 

Your manufacturers can offer interior and exterior padlock hasps for standard roof hatches as an access control feature. If you want more enhanced security, you can design hatches to include keyed cylinder locks or contact switches that you can wire into a building's alarm system control panel.

Knowing the different factors in choosing the proper roof hatch for your establishment is vital to keep the security and maintain the quality of your roof. You can easily monitor your roof's quality and provide easy access to any needs with roof hatches. When purchasing a roof hatch, make sure you communicate thoroughly with your manufacturer so they can assist you in finding the ideal one for your establishment. 

Steps for Turning Your Unfinished Basement Into a Living Room

Your unfinished basement represents a ton of potential. Turning it into a liveable area where you can relax and entertain might be easier than you think. Follow these steps, and you'll be lounging around down there in no time.

Conduct a Preliminary Damage Assessment

First, you've got to check for any potential damage. A lot of times, there might be a crack in the foundation. Foundation repair is crucial if you want to turn your basement into a living room. Otherwise, all your hard work could be lost. Repairing the foundation doesn't take too long, and it'll make the rest of the work worthwhile. 

Properly Seal the Room

After checking for damage, it's time to think about sealing the basement properly. Most unfinished basements aren't entirely waterproof. As such, small amounts of moisture might find their way inside. Applying an industrial-grade sealant to the corners should solve the problem, though. After this important step has been completed, you can move on to other projects.

Think About Floors

Flooring would be the next project on your list. Don't fall for the wooden floors, though. Those tend to wear down a lot faster than other options. We'd suggest tile for the easiest solution. Tile doesn't need a whole lot of attention. Plus, you could always throw a rug on top of it. You can also choose to install carpet if you want something more warm and cozy. Carpets can require more cleaning, especially in a dusty basement, but it can be worth it if you want the warmth. Concrete can be another option. This is an inexpensive option, but isn’t very comfortable. However, you can add rugs to make it more cozy and warm. Concrete flooring is becoming more popular, so it can be a good option if you want your basement to look trendy and modern. 

Get Creative With the Walls

Have you thought about what you're going to do with the walls? For a truly sublime experience, start by hanging up some drywall. Make sure there is a little space between the basement's walls and the drywall. Once the drywall is in place, the space will start feeling livable instead of feeling like a dingy basement. After drywall is installed, you can start decorating. Wallpaper tends to be pretty easy to work with, especially if it is peel and stick. So, you might want to use some of that. Nevertheless, there's always something appealing about good old-fashioned paint. You might want to purchase some wall decor too. Unique paintings can start to give your living room character. Don’t underestimate the importance of focusing on designing and decorating your walls. 

Choose Lighting

Next, it's time to think about how you'd like the lighting to look. Most basements don't have a ton of windows, and some of them don't have any at all. So, how you plan your lighting will make a huge impact. Blue lights might not feel super relaxing. So, if you want it to feel like a living room, you might want to use something with a reddish hue. You might also want to purchase a few lamps if you don’t want the lighting to be too harsh at night. It will lighten up the room, without being too bright while you are relaxing. 

Purchase Furniture

The last thing you will want to do is purchase furniture for your new living space. Think about how much space you have to work with. If you have a large living room, a large sectional sofa can be a great option. If you don’t have enough space for a sectional, a loveseat and some chairs will work great too. Choose a furniture style that you know you will love for years to come. Don’t go with anything too trendy, but also don’t be afraid to show off your personality and taste through furniture. Furniture will tie the whole room together and can create a focal point for the room. Make sure you take enough time to make a decision before purchasing the furniture. 

Turning your unfinished basement into a living room is pretty straightforward. Follow the tips in this guide, and you'll be done soon. Then, you can focus on enjoying it.

How to Upgrade Your Toilet with a Bidet

It wasn’t all that long ago that bidets were found almost exclusively in European bathrooms or the homes of the extremely wealthy. However, more and more Americans have been turning towards bidets in recent years, and for good reason. Using a bidet is generally considered to be far more hygienic than using toilet paper alone. Moreover, bidets tend to clean things better and more thoroughly. These reasons make upgrading your bathroom with a bidet something everyone should consider, and here is everything you need to know to get it done.

Traditional Bidets vs Toilet-Mounted Bidets

If you plan on renovating your bathroom, a traditional bidet is definitely an option. However, you can also enjoy the benefits a bidet can provide without the need for major construction work. There are now a large number of toilet-mounted bidets and bidet sprayers on the market that can be installed easily on your existing toilet.

Choosing the Right Bidet

You typically have two options for adding a bidet to your toilet: a bidet toilet seat or a handheld bidet sprayer. Handheld bidet sprayers resemble a showerhead and are mounted next to the toilet, whereas a bidet toilet seat is mounted directly on your toilet in place of the old toilet seat. Both bidet types can be a good option, but the majority of people opt for a bidet toilet seat for ease of use and added convenience. Bidet sprayers require you to hold the sprayer head in your hand and lean to the side while attempting to aim the stream of water where it needs to go. This often results in spraying water all over the bathroom and still not getting fully clean. However, these issues aren’t something you need to worry about with a bidet toilet seat. All you have to do is turn the bidet on and it automatically directs the stream of water directly where it needs to go.

Installing the Bidet

No matter which option you choose, the process for installing it is mostly the same. Primarily, it involves connecting the bidet into your existing water line and then mounting the unit. Depending on your skills, this could be a job that you can do by yourself fairly easily in just a few hours. However, not doing the job properly could result in damage to your toilet or water line. Improperly installed bidets also tend to leak, which could lead to more serious water damage. For these reasons, it is usually best to enlist the help of professional plumbers to ensure the job is done correctly.

Most people that upgrade to a bidet soon swear that they’ll never go back to just using toilet paper again. This means that it could be one of the better decisions you ever make. Nonetheless, it is important that you take the time to ensure the bidet is installed properly to prevent damaging your bathroom.