Cleaning pool tile at the waterline
We partnered with a home improvement company for this post. The opinions in the post are honest. All reviews and opinions expressed in this post are based on our personal views. We are excited because we know you will love it.
Introduction
Although owning a swimming pool or spa in your backyard is a huge benefit, they also require a lot of care to be in peak condition. Even though you may already be aware of the need to keep leaves and other trash away from the water, discoloration may occur or filth can still accumulate on tile surfaces near the pool's waterline. This article will teach you how to take care of it.
What causes it?
Staining and discoloration of pool tiles are frequently caused by chemical problems. Your pool care service will likely use chemicals to clean the accumulation as part of their regular maintenance. But, if you are maintaining the pool yourself, you will need to clean it often to keep the stains from getting so bad that you must change the tiles to keep it looking clean.
Here are the types of equipment you’ll need:
Vacuum for the pool
Net for skimmers
Protection for the eyes
Brush with stiff bristles.
A brush with soft bristles
A water bucket
Gloves made of rubber
Motor pump for the pool
Steps to clean the waterline tiles
Turn on your pool cleaner: Before you begin cleaning the tiles, turn on your pool cleaner. This will help prevent the dirt from making its way back and remove any bigger dirt particles clinging to the swimming pool tile.
1. Make use of cleaning nets: To get rid of blades of grass, leaves, and other natural waste from the water, use a motorized pool cleaning or skimmer net.
2. Lower the level of water: You may use a pipe to create a drainage system or turn on the pump in the swimming pool to lower the level of the water. If the level of water in your pool is a little lower than normal, it will be simpler to clean the dirty tiles.
3. Use a scrub: Brush the mineral formations off with a scrub brush that has strong bristles. Scrub in a circular manner in areas that are around three to four feet broad. A soft-bristled brush is a preferable option if you have glass tiles because it won't scratch them. An electric scrub brush that can be recharged and uses replaceable heads is a useful tool in this process. An old toothbrush is a good tool for small, unreachable places.
4. Remove the dirt: Scrub the tile surface at the waterline with a scrub brush dipped in the cleaning solution. Now that the layers of minerals have been removed, you can eliminate the covering of dust, dirt, and body filth. For stubborn stains, use a melamine sponge. As you proceed around the pool's boundaries, repeat the cleaning procedures after sprinkling some water over the cleaned region.
If the accumulation of contaminants, algae, and mineral buildup near the waterline is very severe, schedule the cleaning of the pool tile in stages over a few weeks or several days. This will help in keeping the chemical equilibrium of the water in your pool stable and keep the filtering equipment from overworking.
Frequency of cleaning pool waterline tiles
If you see any color change, usually once a week or once a month, you should clean the tiles near the waterline. Heavy discoloration or staining is far more difficult to remove than little buildup near the waterline. The tile surface must always be maintained at the start and finish of the pool season.
How does dirt from here?
Body dirt, sunscreen lotion, and layers of minerals that cling to the tiles are some of the common accumulations of dirt that may be seen on pool tiles. The surfaces of your pool will most likely have hard-water stains if you have them in your home's sinks or bathtubs. Scaling happens when sediments of minerals bond to a pool's sides as water drains. It is hard to get rid of and appears as gray or white slime.
Getting rid of pool stains
Sometimes, a stain persists no matter how hard you try to remove it. Even the most difficult stains may still be removed with a few strategies.
1. Make use of a pumice stone: If a scrubber and a detergent aren't enough to remove mineral deposit stains from pool tile, a pumice stone can help. Pool supply stores, renovation stores, and the internet all sell pumice stones. The stone, which is composed of pulverized volcanic material, will disintegrate the accumulations. When using a pumice stone, keep the tile and rock moist at all times to prevent excessive scratches. Scrub the waterline using small circles, taking your time and being careful.
2. Make use of a commercial cleaner: A tile cleanser that contains strong acid is an option if the pumice stone is unable to remove the buildup. Extreme caution is required while using these powerful cleansers. Use these just before adding the standard pool chemicals to the water. After cleaning the pool, wait for a few days before swimming in it or adding additives to the water.
When should a professional be hired?
It could be necessary to speak with a pool care firm that offers high-pressure cleaning for tiles if you don't want to use harsh cleansers. It typically costs $150 per month to have your pool maintained. It would be recommended to contact a pool construction company or tiling expert to change or fix any chipped or cracked tiles. Without considering the price of replacing tiles, your budget will be between $50 and $100 per hour for a tiling specialist to perform work on your pool's tiles. The typical price to retile a whole pool will be around $15,000.
Additional tips to maintain your pool tiles
To minimize the accumulation of algal cells, waste products, chemical deposits, or scale, clean the pool tiles regularly according to a timetable.
Verify that the concentrations of chemicals in your pool are sufficient. Any variance that is less than ideal may promote the growth of green algae or additional debris.
