The split air conditioning installation is a critical job. If it is carried out properly then the unit will provide you with the finest performance. But if it is not carried out efficiently then you will never get a proper cooling effect in the room and there may be recurrent breakdown of the system. If you want to save money on the regular repairs, then it is advisable to get your split AC installed only by a professional. This is not a “DIY Sunday” job, and you should never put your hands in something where you do not understand its ways and means.
How To Install Split Air Conditioning
Installing an AC professionally needs experience and learning. It does take proper practice. There may be gas leakage if the AC is not installed professionally. There are a lot of factors that you need to consider when you are getting the split AC installed.
In the very beginning, you need to check the exact location for the installation of the indoor and outdoor AC unit. Only after a proper identification of the place you can begin with the steps of installation. As the name goes, the indoor AC unit needs to be installed inside a room whereas the outdoor AC unit is meant to be installed outside. If you place the indoor unit just over your bed, then you ensure maximum cooling. Now, if you do not wish for the chilled air right above your head then you can always change the position of the louvers. During the air conditioning installation, the indoor unit must be at least 10 feet above the floor. Then the cool air will circulate throughout the room and will not just cool the roof. The indoor unit must be installed at a convenient place so that it is easy to clean the filters. It is imperative to place the outdoor unit in open air so that the condenser and compressor receive free flowing air.
There are a lot of factors that need to be considered during the split air conditioning installation. They are:
#1. Strength of Wall
When you are installing an indoor unit, it is vital to ensure that the wall is strong enough to hold the weight of split AC. You will not be able to determine this on your own and would need the help of a professional.
#2. Proper Spacing Between AC Unit and Wall
When installing the split AC indoors you would need to give a gap of 15 cm on the top and sides to ensure the proper flow of air.
#3. Maintain Proper Height from Ground
If you want proper cooling in the indoor area where you are planning to install split air conditioning, then you need to mount the unit at least 8 to 10 feet above the ground for the proper circulation of cool air inside the room.
#4. Correct Tilt Angle
When you are getting the aluminum bracket fixed on the wall, make sure to give it a slight angle so that when the indoor unit of AC gets fixed, it is also at the slight angle. This angle will help in providing unrestricted flow of the condensed water from the drainpipe.
#5. Accurate Location of Outdoor AC Unit
If you want proper cooling from the split AC unit then you must get the outdoor unit mounted at a proper location which is away from the direct sunlight. It should be an open space so that the hot air can easily dissipate from the condenser.
In the end, split air conditioning installation is a tough job, and you would need a proper guidance from a professional technician. It is advised to not install the split AC unit all by yourself. This is because a professional understands all the technical details regarding the machine in a much better way.
